Using Your Gateway Flat-panel Monitor

Setting up the optional stand

Attaching the USB stand

In the United States, you can buy an adjustable USB stand from www.gateway.com. The stand can be adjusted for height, tilt, and screen rotation. When connected to your computer’s USB port, you can connect as many as four USB devices to the USB 2.0 ports on the stand.

To attach the adjustable stand:

1Make sure that the monitor is turned off.

2Place the monitor face-down on a soft, non-marring surface. A non-slip mat on a tabletop is ideal. Let the monitor base hang down over the edge of the table.

3Press the two release buttons on the back of the monitor’s original neck, then slide the monitor base out of the neck.

Release Button

Release Button

4Remove the screw from the neck hinge, then remove the neck from the LCD panel. Do not discard the screw.

Screw

4