www.gateway.com

Adjusting the stand

Rotating the screen image

Depending on the graphics card or device driver on your computer, you may be able to rotate the on-screen image.

To rotate the screen image:

■On Gateway computers, you can rotate the image by pressing CTRL+ALT+[LEFT ARROW], and return it to normal by pressing Ctrl+Alt+[UP ARROW].

For more information, click Start, Control Panel, Appearance and Themes (if necessary), Display, the Settings tab, Advanced, then click the graphics card-specific tab.

Adjusting monitor height tension

The stand is factory adjusted to maintain the adjusted height for Gateway

17-inch and 19-inch flat-panel monitors. If you use this stand with a lighter monitor without adjusting the weight setting of the stand, the stand will raise your monitor, and if you use a heavier monitor, the stand will lower your monitor.

To test and adjust your monitor’s height tension:

1Move your monitor up and down through its entire vertical range. If it does not stay in place when you let go, you need to change the adjustable stand’s height tension. You also need to adjust the stand if the amounts of force required to raise and lower the monitor are not equal.

2Adjust the height tension screw so the monitor stays in place when you let go. If the monitor lowers by itself when you let go, turn the screw clockwise several complete turns. If the monitor rises when you let go, turn the screw counter-clockwise several complete turns. You may need to turn the screw several times before the tension is correct for your monitor.

Increase lifting tension (clockwise)

Decrease lifting tension (counter-clockwise)

5