Input Select
VGA mode: Auto
DVI, HDMI, and Component mode: Video Adjust PIP On/PIP Off
Cancel
Main Menu
To use the shortcut menu:

Using Your Gateway Flat-Panel Monitor

Adjusting monitor settings

Use your monitor controls (located on your monitor itself) and computer controls (accessible through Windows) to adjust the display image. For more information about computer controls, see “Changing Windows screen settings” on page 10.

Using the EzTouch menu buttons

This monitor features an on-screen display (OSD) and EzTouch menu buttons that let you adjust contrast, brightness, and other settings for your monitor. Your monitor saves changes you make to the settings, even if you turn off your monitor.

Your monitor has two levels of menus, and the functionality of the touch buttons depends on the menu that is currently open:

•The shortcut menu lets you quickly change some of the most commonly adjusted settings.

•The main menu lets you precisely adjust all levels of settings.

Using the shortcut menu

1Touch Menu on the front of your monitor. The rest of the button icons light up and the shortcut menu opens.

2To use an EzTouch menu button, lightly touch its icon. For adjusting a setting’s values, you can touch and hold touch buttons as you would conventional buttons.

•Touch Input Select to select an available video source.

•Touch Auto (VGA mode) or Video Adjust (DVI, HDMI, and component modes) to adjust your display image to the ideal settings.

•Touch PIP On to turn on Picture-in-Picture, and touch PIP Off to turn it off.

•Touch Cancel to exit the shortcut menu.

•Touch Main Menu to open the main menu.

•To turn off the button icons and close the menu, wait about ten seconds without touching a button.

6