www.gateway.com
5Plug the speaker bar’s audio plug into the audio jack on your monitor.
Important
For best audio performance, if your video connection uses HDMI, the digital audio is also conveyed along the same cable, and no additional audio connection is required. You may need to set your video source’s audio mode to PCM or ANALOG to hear the audio. See your source device’s user guide for more information.
To remove the speaker bar:
1Disconnect all audio and power cables from the speaker bar.
2Press the two clips on the back of your monitor, then slide the speaker bar back.
Starting your monitor
To start your monitor:
1Touch the power button on the front of monitor. The power LED on the power button changes from purple (off) to orange (standby).
Power button
2Turn on your computer. After your computer is running, the power LED on your monitor’s power button should be blue. Allow about 10 seconds for the display image to appear. If the power LED is not blue or you do not see a display image, check the connections. For more troubleshooting information, see “Troubleshooting” on page 12.
3Adjust the tilt of your monitor for the best viewing angle.
4Use the
5