276
Chapter 16: Using the Gateway M275 Port Replicator
www.gateway.com
Connecting to the port replicator
You can attach your convertible tabletPC to the port replicator while your
convertible tablet PC is off, on, or in Standby mode.

Attaching to the port replicator

To attach your convertible tabletPC to the port replicator:
1Make sure the docking release latch is in the fully raised position.
2Align the connector holes on the bottom of your convertible tabletPC with
the docking posts on the port replicator.
3Press down on the docking release latch until your convertible tablet PC
moves into place.
4Connect external devices to the ports on the port replicator.
Important Your convertible tabletPC may detect additional devices
and add drivers after being attached to the port replicator.
This process must be completed for components to work
correctly. Follow any on-screen instructions, if necessary.