244
Chapter 15: Upgrading Your Notebook
www.gateway.com
To add or replace memory modules:
1Follow the instructions under “Preventing static electricity discharge” on
page 242.
2Turn off your notebook and disconnect the AC adapter and modem and
network cables.
3Turn your notebook over so the bottom is facing up.
4Remove the battery. For more information, see “Replacing the battery” on
page 153.
5Loosen the memory bay cover screw, then remove the memory bay cover.
6If you are removing a module, gently press outward on the clip at each
end of the memory module until the module tilts upward.