Voyager3

Operations Manual: Installation

CAUTION: Do not locate the laminator where air can blow directly on the machine. The air flow can cool the rollers unevenly and result in poor quality output.

Have you contacted a certified electrician to install a receptacle for the laminator ensuring that adequate power and correct circuit breaker is being supplied?

The laminator and heater requires 380 Volt AC, 50/ 60 Hz, 50 amps, Delta three phase (four wire) power. For US, a transformer is required to step up power from 230 Volt 3 Phase to 380 Volt 3 Phase AC. Refer to Figure 4.1.2 connections.

For heater requirements, consult the heater manual for your unit.

INFORMATION: The vacuum/ pump, feeder and heater units will draw it’s electrical power from the laminator.

Is tap and drain water available?

Water supply should be hard plumbed with a

3/4 in. (1.9 cm) NPT supply and drain. Refer

to Figure 4.1.2 connections.

Is proper air pressure available?

Air pressure required is 80-90 psi min. (0.56-0.63 Mpa) with an air flow of 10-13 cfm (280-360 liters/ min.). Refer to Figure 4.1.2 connections.

CAUTION: Tripping Hazard. If connections are not dropped from the ceiling, all lines and hoses must be covered to prevent trip hazard.

Page 4-2

2004 General Binding Corporation

Page 25 Page 27
Page 26
Image 26
GBC 930-032 operation manual To .1.2 connections
Page 25 Page 27

930-032 specifications

The GBC 930-032 is a cutting-edge device designed for seamless document management and handling, making it an essential tool for offices, schools, and any organization that requires efficient processing of paperwork. This model is part of GBC's impressive lineup of document finishing solutions, which are known for their innovation, reliability, and advanced technology.

One of the standout features of the GBC 930-032 is its advanced laminating capabilities. This device supports various lamination thicknesses, allowing users to choose the level of protection needed for their documents. Whether it's for important reports, marketing materials, or educational resources, the 930-032 ensures that all documents are preserved in perfect condition, resistant to wear, tear, and environmental damage.

The GBC 930-032 employs thermal lamination technology, which provides a glossy, professional finish. It heats lamination films to the perfect temperature, ensuring a strong bond with the document while minimizing the risk of bubbling or wrinkling. This technology is not only effective but also efficient, allowing for quick processing times that keep up with the demands of busy workplaces.

Equipped with user-friendly controls, the GBC 930-032 features an intuitive interface that simplifies the laminating process. Users can easily select settings with just a few clicks, making it accessible to individuals with varying levels of experience. The device also includes automatic shut-off features for energy efficiency, displaying GBC’s commitment to sustainability.

The GBC 930-032 is designed with versatility in mind. Its capability to handle different sizes of documents, from standard A4 to custom sizes, allows organizations to streamline their workflow without needing multiple machines. This flexibility is a valuable asset in environments that produce a wide range of materials.

In terms of build quality, the GBC 930-032 boasts a robust construction that is designed for long-term use. With high-quality components and a reliable motor, users can expect consistent performance over time. This durability reduces maintenance costs and enhances productivity, making the GBC 930-032 a worthwhile investment.

Overall, the GBC 930-032 is an exceptional document finishing solution, delivering efficiency, quality, and versatility in one compact device. Whether for professional presentations, educational charts, or everyday office documents, the GBC 930-032 stands out as a reliable choice for anyone looking to enhance their document management capabilities.
Top Page Image Contents