Falcon 36 Operation Manual

/XEULFDWLRQ

Tools required:

∙1/8" hex wrench

∙High temperature grease or lithium grease

∙Grease gun

To lubricate the laminator:

WARNING

Do not lubricate the laminator when it is hot.

You can be burned.

WARNING

Unplug the laminator and make sure it won't be plugged back in while you are performing this procedure. You could be severely shocked, electrocuted, or get your fingers caught in the drive mechanisms.

1.Remove the drive and control side cabinet covers using the 1/8" hex wrench by removing the six screws holding each cover in place.

2.Using the grease gun, lubricate each grease fitting (shown in Figure 4-7) with one squirt of high temperature grease.

Maintenance and Troubleshooting

Grease

WARNING

 

EN

 

 

ACHTUNGMISE

Fittings

 

GARDE

 

 

 

 

Moving

 

 

 

crush

 

 

 

Do andparts

 

 

doornot

cut.can

 

openoperate.

with

Figure 4-7: Grease Fittings

3.Lubricate the chain using a soft cloth and automotive oil.

4.Replace the cabinet covers and reconnect power to the laminator.

&RQWDFWLQJ￿7HFKQLFDO￿6XSSRUW

For machine parts and technical service: North America: 1-800-790-7787. Europe: +44 (0) 1844 202 440

or fax: +44 (0) 1844 202 441.

Please provide serial number when calling for service.

For film and application questions:

North America: 1-800-236-8843.

Europe: +44 (0) 1844 202 440

or fax: +44 (0) 1844 202 441.

© GBC Pro-Tech 1997 October

4-7