GBC TRIMMER 5 & 3IN1 / A100 & A200, Cutting Restrictions, To replace the blade carrier

Models: A100

1 28
Download 28 pages 62.68 Kb
Page 4
Image 4
 TRIMMER 5 & 3IN1 / A100 & A200

Cutting Restrictions TRIMMER 5 & 3IN1 / A100 & A200

Cutting Restrictions

Remove staples, paper clips etc before cutting

Do not cut metal film or film containing glass etc.

Do not cut more sheets than capacity allows

Trimmer should be operated by an adult or under adult supervision

Do not carry trimmer by holding onto the cutting blade handle

Always operate trimmer with both hands on a stable base or desk

Do not touch the edge of the blade

Check the fittings of the rotary blade and cutting rail from time to time

To replace the blade carrier

1Slide carrier to the centre of the cutting guide at the 15cm mark A.

2Open the cutting guide slightly and remove the used carrier. Snap in the new carrier. Your fingers will not touch the blade B.

3Only use the accessories that are approved by the manufacturer.

Guarantee

Operation of this machine is guaranteed for one year from date of purchase, subject to normal use. Within the guarantee period, GBC will at its own discretion either repair or replace the defective machine free of charge. Defects due to misuse or use for inappropriate purposes are not covered under the guarantee. Proof of date of purchase will be required.

Repairs or alterations made by persons not authorised by GBC will invalidate the guarantee. It is our aim to ensure that our products perform to the specifications stated. This guarantee does not affect the legal rights which consumers have under applicable national legislation governing the sale of goods.

Page 4
Image 4
GBC instruction manual TRIMMER 5 & 3IN1 / A100 & A200, Cutting Restrictions, To replace the blade carrier, Guarantee