Upgrading the printer’s memory C-3
Installing SIMMs into the Elite XL
5. Remove the controller board access panel.
8ppm printers –
a. Hold the paper output tray so that it is almost pointing straight up.
b. With your thumb, press in on the tab at the center of the access board
panel and rotate the panel upwards.
16ppm printers –
a. Hook your index finger into the notch at the center of the front edge of
the controller board access cover.
b. Pull up on the access cover; you will need to exert a reasonably strong
upward force in order to free the front edge of the cover.
With the access cover removed, the controller board’s metal shield will be
visible.
Notch