GE 106754 warranty At U R E S O P E R At I O N, Comfort GEL Insert

F E AT U R E S - O P E R AT I O N

COMFORT GEL INSERT

The Comfort Gel Insert has been included for your luxu- ry and comfort. The soft gel sole contours to your feet providing soothing warmth and relaxation for your tired feet. You may also choose to use your Comfort Gel Insert without warming. A chilled Comfort Gel Insert is a refreshing way to invigorate your feet. Whether warmed, at room temp, or chilled, the Comfort Gel Insert helps to soothe aches and rejuvenate your weary feet.

TO USE:

1.TO WARM the Comfort Gel Insert, fill a tall pitche with HOT TAP WATER. Then place the Comfort Gel Insert into the hot water and let sit for approxi- mately 5 minutes or to your preference.

2.Use caution not to scald hands when removing Comfort Gel Insert from hot water. First, pour out the hot water and then remove the Comfort Gel and place in Foot Spa. You may also opt to use your gel pack at room-temp and therefore no heating is necessary.

CAUTION:

•Only use tap water when warming Comfort Gel Insert

•Do not place Comfort Gel Insert into boiling water

•Do not microwave Comfort Gel Insert

3.TO CHILL the Comfort Gel Insert, PLACE IN FREEZER (for up to 2 hours) or in REFRIDGERATOR (for 2-8 hours.) Once gel has cooled to your preference, remove from cooling source.

4.Place Comfort Gel Insert onto the floor of the Foot Spa.

5.Ensure that the unit is unplugged before filling with water.

6.CAUTION: Do not fill past Fill line. Do not use on surfaces that could be damaged by water.

7.Once the tap water has reached the temperature of your preference, fill the Foot Spa with clean tap water to the designated water level. Overfilling the tub may cause splashing. If you do not want warm water, fill with cool water.

THE HEAT FUNCTION ON THIS FOOT SPA WILL MAINTAIN WARM WATER TEMPERA- TURE. IT WILL NOT HEAT COLD WATER. FOR BEST RESULTS FILL WITH WARM WATER.

8.CAUTION: Use caution when carrying unit. Unit can be heavy with water inside.

9.Place Foot Spa on a dry, level surface that will not be damaged by water should any splashing occur Always be sure that hands are dry before touching power cord or control dial.

10.Plug the power cord into a household 120-volt outlet.

11.Set the control dial to the setting of your choice.

The four settings are:

A. OFF (No massage)

B. VIBRATION, HEAT

C. WATERFALL & HEAT

D. WATERFALL VIBRATION, & HEAT

•The Comfort Gel Insert may be used with each of the above settings, if desired.

C

BD

A

VIBRATION:

Sends wave after wave of rejuvenating massage to feet.

HEAT:

Helps to maintain warm water temperature.

WATERFALL:

Cascade of water.

COMFORT GEL INSERT:

Cushions and helps relax tired feet in luxurious comfort.

DO NOT stand on or in appliance.

Use only while seated.