USING CALL BACK
Call Back is used to automatically dial a number stored in memory.
1.Make sure the phone is OFF by pressing the PHONE or SPEAKER button.
2.Press MEMORY.
3.Use the arrow buttons to scroll through the numbers stored in memory and press CALL BACK when you reach the desired number.
CHAIN DIALING FROM MEMORY
CALL BACK
Use this feature to make calls that require a sequence of numbers, such as a calling card number used for a frequently called long distance number. The following example shows how you can store each part of the long dialing sequence and use chain dialing to make a call through a long distance service:
The Number For | Memory Location |
Long distance access number | 7 |
Authorization code | 8 |
Frequently called long distance number | 9 |
|
|
1.Make sure the phone is ON.
2.Press MEMORY and then press 7.
3.When you hear the access tone, press MEMORY and then press 8.
4.At the next access tone, press MEMORY and then 9.
TIP: Wait for the access tones before pressing the next memory button or your call might not go through.
24
