GE 16174120 manual Introduction Before You Begin, Parts Checklist, Modular Jack Requirements

Introduction

CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference.

Before You Begin

Parts Checklist

Make sure your package includes the following items:

		YSTEM		VOICE	TIME /DAY
		LMESSAGINGS					S
	DIGITA						TAMP
			ERASE	SET		ON OFF
T M							+
M
E							-		E
O /
W O								UM
W S
A	C							L
Y	A	2			4		O
	N		3				V
	FO
		UR
		MAI				Y
		LB				PLA
		OXES	1		HTO
				TOUC
		Answerer							AC power supply	Telephone line cord

Modular Jack Requirements

You need an RJ11 type modular jack, which is the most common type of phone jack and might look like the one pictured here installed in your home. If you don’t have a modular jack, call your local phone company to find out how to get one installed.

Wall plate

Modular telephone line jack

Installing the Battery	Battery
In the event of a power loss, a 9-volt battery (not included) enables the
	compartment
answerer to retain greetings and messages stored in memory. To install
	door
the battery:
1. Remove the battery compartment door on the bottom of the unit by
loosening the screw with a Phillips screwdriver. Lift the door.
2. Connect a fresh 9-volt alkaline battery (not included). The large and small		Battery clip
contacts on the battery clip and the battery will interlock. Once connected,		- +
place the battery inside the battery compartment.

3. Replace the battery compartment door and tighten the screw.

NOTE: If the battery is low or not installed, the unit announces Battery - + “Low Battery” at the end of message playback.