GE 164D3333P071 Using the surface units.

Using the surface units.

Troubleshooting TipsInstallation Instructions Customer ServiceOperating InstructionsSafety Information

13

How to Set

Push the knob in and turn in either direction to the

setting you want.

At both

OFF

and

HI

the control

clicks

into position. You

may hear slight

clicking

sounds during cooking,

indicating the control is keeping the power level you set.

Be sure you turn the control knob to

OFF when you finish cooking.

Indicator Lights

A

HOT COOKTOP

indicator light will glow when any

radiant element is turned on, and will remain on until

the surface is cool enough to touch.

A surface unit

ON

indicator light will glow when

any

surface unit is on.

NOTE: The surface unit ONindicator light may glow between the

surface control settings of LO and OFF, but there is no power to the

surface units.

Dual Surface Unit Switch

(on some models)

To use the small (6 inch) surface unit, push in the

SMALL BURNER

portion of the switch next to the

control knob.

To use the large (9 inch) surface unit, push in the

LARGE BURNER

portion of the switch.

9" 6"

The right front surface unit has

2 cooking sizes to select from so you

can match the size of the unit to the

size of the cookware you are using.

Contents

Main GE Appliances Ranges Self-Cleaning Radiant Congratulations! You Are Now Part of the GE Family. Important! GE & You, A Service Partnership. Read this Manual If You Need Service Review the Section on Troubleshooting T ips WARNING ANTI-TIP DEVICE IMPORTANT SAFETY NOTICE CAUTION: SAFETY PRECAUTIONS WHEN COOKING PORK REMEMBER : OVEN SELF-CLEANING OVEN RADIANT SURFACE UNITS NOTE: Cleaning the glass cooktop REMEMBER SAVE THESE INSTRUCTIONS Using the surface units. How to Set Dual Surface Unit Switch Indicator Lights Using the surface units. About the radiant surface units Selecting types of cookware. Using the oven controls. 8 7 6 5 TEMP RECALL 321 4 Throughout this manual, features and appearance may vary from your model. Clock and Timer Features Page To remove a shelf, To replace, Using the oven. C B A B Aluminum Foil Preheating and Pan Placement How to Set the Oven for Broiling Broiling guide. BROIL. Broiling guide 20 Using the clock and timer. To Set the Clock: CLEAR/OFF CLOCK CLOCK Using the timed baking and roasting features. Do not latch the oven door during timed cooking. The latch is used for self-cleaning only. How to Set an Immediate Start and Automatic Stop How to Set a Delay Start and Automatic Stop Adjust the oven thermostatDo it yourself! For Models with Pads and an Oven Temperature Knob For Models with Only an Oven Temperature Knob Using the self-cleaning oven. Never force the latch handle. Forcing the handle will damage the door lock mechanism. To stop a clean cycle, CLEAN Before a Clean Cycle How to Delay the Start of Cleaning After a Clean Cycle Care and cleaning of the range. Lift-Off Oven Door Care and cleaning of the range. Broiler Pan & Grid Do not store a soiled broiler pan and grid anywhere in the range. To replace the panel, To remove the kick panel, How to Remove the Storage Drawer or Kick Panel to Clean Under the Range Cleaning the glass cooktop. Special Care Before You Begin Tools You Will Need Electrical Requirements 33 Prepare the Opening Page Power Cord Strain Relief Installation c NOTE: Do not install the power cord without a strain relief. Page WARNING: 3-Wire Conduit Installation 4-Wire Conduit Installation Anti-Tip Bracket Installation Important Safety Information Care and cleaning of the range WARNING Leveling the Range Page Page Page Page Page CLEAN light is on when you Power outage flash in the display Fand a number GE Electric Range Warranty All warranty service provided by our Factory Service Centers, or an authorized Customer Care What GE Will Not Cover: Service Telephone Numbers. GE Answer Center Service Satisfaction Finally, Next,