Support Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions

About the controls on the refrigerator.

Your controls will look like one of the following:

FREEZER

REFRIGERATOR

 

4

5

6

4

5

6

 

3

 

7

3

 

7

 

2

 

8

2

 

8

0 IS OFF

 

 

 

 

 

 

 

 

 

 

1

 

9

1

 

9

9 IS COLDEST

 

 

9 IS0COLDESTIS OFF

 

 

 

 

 

 

0

 

 

 

 

 

 

Startup Steps for Proper Temperature Control

 

NOTE: Turning the refrigerator to the 0 (off) setting via the controls

STEP 1—Set Fresh Food Control on “5.”

 

does not shut off electrical power to the refrigerator.

 

Control settings will vary based on personal preferences, usage

STEP 2—Set Freezer Control on “5.”

 

STEP 3—WAIT 12 HOURS for temperature to stabilize.

 

and operating conditions and may require more than one adjustment.

 

 

 

 

 

 

STEP 4—If a change is needed, move the control one number at a time and allow 12 hours for temperature to stabilize.

To Change Temperature Control Setting with Touch Pads:

To Turn Cooling Off:

• Freezer setting is on the left side of the display.

To stop cooling in the refrigerator and freezer compartments, first

• Refrigerator setting is on the right side of the display.

repeatedly press the Warmer pad for the freezer until its display

continuously flashes “1”. Then, using the refrigerator control,

— Press the Warmer or Colder pad for compartment and

repeatedly press Warmer until both displays flash “0”. “0” in both

direction desired.

displays turns off the cooling system. On some models, it may be

— Present control setting number will illuminate.

necessary to set only one control to 0 to turn off cooling in both

— Each time the pad is touched, compartment setting

compartments.

changes one number.

NOTE: Turning the refrigerator to the 0 (off) setting via the controls

A display of 1 is warmest and 9 is the coldest setting.

does not shut off electrical power to the refrigerator.

Control settings will vary based on personal preferences, usage

 

 

 

 

 

 

 

 

 

 

 

 

and operating conditions and may require more than one adjustment.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Consumer

The temperature controls are preset in the factory at 37°F for the refrigerator compartment and 0°F for the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings.

The temperature controls can display both the SET temperature as well as the actual temperature in the refrigerator and freezer. The actual temperature may vary slightly from the SET temperature based on usage and operating environment.

6

Setting either or both controls to OFF stops cooling in both the freezer and refrigerator compartments, but does not shut off electrical power to the refrigerator.

NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed during installation, remove it now.