REVIEWING CALL RECORDS

Press either the REVIEW up or REVIEW down button to view the newest call record.

Press the REVIEW down button to scroll through the call records from the most recent to the oldest.

Press the REVIEW up button to scroll through the call records from the oldest to the newest.

When all of the messages have been viewed, START/ END appears in the display.

DELETING CALL RECORDS

To delete the record shown in the display, press the DELETE button once.

To delete all records while reviewing, press and hold the DELETE button for about 3 seconds. DELETE ALL? appears in the display. Press DELETE again to complete.

DIALING BACK

When reviewing Caller ID records, you can dialback the numbers shown on the display by pressing the DIAL button.

NOTE: This feature DOES NOT work when the handset is picked up.

IF YOU PROGRAMMED YOUR LOCAL AREA

CODE IN THE SETUP MENU

1.Use the REVIEW up and down buttons to display the number you want to dial.

If you see a number with 7 digits (i.e. 555-1234), then the call was received from within your area code. However, this does not guarantee the call is a local call.

If you see a number with 11 digits (i.e. 1-234-555- 1234), then the call received was not from your area code.

2.Press the DIAL button and the display shows PICKUP or ADJ. A 15 second timer will also start at this point on the upper right side of the display, letting you know the time until the unit will return to the Caller ID record. If you adjust the number to be dialed, the timer will reset after each adjustment.

14

Page 14
Image 14
GE 2-9191 manual Reviewing Call Records, Deleting Call Records, Dialing Back