Motion FWS-001 Using speech recognition, Setting up speech recognition, Set up the microphones

9.Follow the on-screen instructions. 10.Press Esc to end the process.

Resetting the display after returning the tablet to the docking station

If you set up your tablet in a docking station with the display theme expanded across both, and you remove the tablet temporarily from the docking station, the display theme may need to be reset when you return the tablet to the docking station.

If it doesn’t seem to work, change the Display Scheme to Tablet Only and then change it to the desired scheme.

Using speech recognition

You can use speech recognition to interact with your tablet by voice. You can dictate documents and emails or use voice commands to control programs.

•Dictation mode—With Dictation mode, your tablet listens to everything you say and converts your words to text. You can use dictation mode to enter text directly into any document or text box.

•Voice command mode—With Voice command mode, your tablet listens for specific words that correspond to a list of available voice commands. You can use commands to switch between programs, save documents, copy, paste or undo.

Setting up speech recognition

Before you can use speech recognition, you must configure the microphones and train the system for the characteristics of your voice. Then, you can take the available speech tutorial to learn basic voice commands.

Set up the microphones

For best results, move to a quiet environment.

To set up the microphones

1.In Control Panel, tap the Ease of Access category, then tap Speech Recognition.

2.Tap Set up microphone.

3.If you are using the tablet’s microphone array, select Other.

4.Follow the instructions in the setup program.

5.If the microphones are set to an appropriate level, the meter will stay in the green zone while you read the sentences. If the level is too low or too high, use Motion Dashboard to adjust the level (page 16).

42 Chapter 2 Using your CL900 Using speech recognition