Adjusting tablet PC settings
From Tablet PC Settings, you can change from
To change hand orientation
1.Open Motion Dashboard.
2.Tap Pen & Tablet.
3.Tap Tablet PC Settings.
4.Tap the Other tab and make your desired change.
The Tablet PC Settings Display tab has a Calibrate option. This does not apply to the CL900. Instead, if touch input does not behave as expected, you can tune touch as described in “Using the touch tuning option” on page 21.
The Configure your pen and touch displays option on the Tablet PC Settings Display tab is useful for assigning touch to the appropriate display when one or more displays are connected to the tablet. By default, Windows 7 assumes that an external display is for touch input. To change this, run Setup from Tablet PC Settings to assign touch to your tablet display. If you have multiple external monitors, run Setup to assign touch to the correct display.
NOTE: A keyboard must be connected to the tablet to perform this procedure.
To assign touch to the desired display
1.Open Motion Dashboard.
2.Tap Pen & Tablet.
3.Tap Tablet PC Settings.
4.Tap the Display tab.
5.Tap Setup next to “Configure your pen and touch displays.”
6.Tap Touch Input.
7.Press the Enter key until you see the instructions appear on the display that you want to use for touch input.
8.Follow the
9.Press Esc to end the process.
Chapter 2 Using your CL900 | Using touch 23 |
