DESKTOP2
INSTALLATION | 5 |
|
3
4 TONE/PULSE switch
If you don't charge the handset battery properly (for 12 hours) when you first set up the phone, performance of the battery will be compromised.
1.Remove the base plate on the bottom of the phone.
2.Plug the telephone line cord into a modular jack.
3.Plug the power supply cord into an AC outlet.
4.Set the TONE/ PULSE switch to TONE for
|
| 1 |
|
| 2 |
|
| 3 |
|
| 4 |
|
| 5 |
|
| 6 |
|
| 7 |
|
| 8 |
PHONE | CHANNEL | 9 |
0
1 ABC 2 DEF 3
PAGE / FIND
5.Raise the base antenna.
6.Turn on the RINGER switch so the handset rings for incoming calls.
7.Place handset in the base to charge for 12 hours. The CHARGE/ IN USE light comes on indicating that the battery is charging.
GHI 4 | JKL 5 | MNO6 |
|
PRS 7 | TUV 8 | WXY 9 |
|
* |
|
| CHARGE |
OPER0 | # |
| |
TONE | IN USE | ||
VOLUME | MEMORY | REDIAL |
|
RINGER | FLASH |
| |
OFF | ON |
|
|
RINGER switch | CHARGE/IN USE light |
6
