GE 2-9751, 2-9752, 2-9753 manual Reset the security code by placing the handset in the

Problem	Solution
	• Reset the security code by placing the handset in the
	base for about 20 seconds.
Dial tone is OK, but	• Make sure the TONE/PULSE switch on the base is
can’t dial out	correctly set (see p. 3).
Handset does not ring	• Make sure the RINGER switch on the handset is
	turned to ON.
	• You may have too many extension phones on your
	line. Try unplugging some phones.
	• See solutions for “No dial tone.”
You experience static,	• Change channels.
noise, or fading in	• Is handset out of range? Move closer to the base.
and out	• Does the base need to be relocated?
	• Charge battery.
	• Make sure base is not plugged into an outlet with
	another household appliance.
Unit beeps	• Place handset in base for 20 seconds to reset the
	security code. If that doesn’t work, charge battery for
	12 hours.
	• Clean charging contacts on handset and base with a
	soft cloth, or an eraser.
	• See solutions for “No dial tone.”
	• Replace battery.
Memory Dialing	• Did you program the memory location keys correctly?
	See p. 8.
	• Did you follow proper dialing sequence? See pp. 8-9.
	• Make sure TONE/PULSE switch is correctly set.
	See p. 3.

13