GE 200D26000P022 Replacing the light bulbs, Tips Consumer Support, Instructions Operating, Safety

Models: 200D26000P022

1 40
Download 40 pages 12.05 Kb
Page 15
Image 15
Replacing the light bulbs.

Replacing the light bulbs.

www.GEAppliances.com

Setting either or both controls to 0 does not remove power to the light circuit.

Safety

Refrigerator Compartment—Upper Light

Refrigerator Compartment—Upper Light Unplug the refrigerator.

Instructions Operating The bulbs are located at the top of the

Tabscompartment, inside the light shield. Remove the screw at the front of the light shield.

To remove the light shield, press in on the tabs on the sides of the shield and slide forward and out.

After replacing the bulb with an appliance bulb of the same or lower wattage, replace the light shield and screw. When replacing the light shield, make sure that the tabs at the back of the shield fit into the slots at the back of the light shield housing.

Refrigerator Compartment—Lower Light Plug the refrigerator back in.

Instructions Operating

Refrigerator Compartment—Lower Light
This light is located above the top drawer.

 

After replacing the bulb with an

 

Unplug the refrigerator.

 

appliance bulb of the same or lower

 

 

 

wattage, replace the shield.

 

 

 

 

 

Lift the light shield up and pull it out.

 

 

Plug the refrigerator back in.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Instructions Installation
Freezer Compartment

Unplug the refrigerator.

Remove the shelf just above the light shield. (The shelf will be easier to remove if it is emptied first.) Remove the screw at the top of the light shield.

To remove the light shield, press in on the sides, and lift up and out.

This light is located above the top drawer. Replace the bulb with an appliance bulb of the same or lower wattage, and reinstall the light shield. When reinstalling the light shield, make sure the top tabs snap securely into place. Replace the screw.

Reinstall the shelf and plug the refrigerator back in.

Instructions Troubleshooting
Dispenser

Unplug the refrigerator.

Replace the bulb with a bulb of the

The bulb is located on the dispenser

same size and wattage.

 

under the control panel.

Plug the refrigerator back in.

Remove the light bulb by turning

 

it counterclockwise.

 

15

Tips Consumer Support

Page 15
Image 15
GE 200D26000P022 Replacing the light bulbs, Tips Consumer Support, Instructions Operating, Instructions Installation