RAK7012 (AZ Series*—2200, 2500, 3200, 3500, 2800, 2900, 3800 and 3900 only)
Duct Adapter for Replacement of
A-B with Rounded-Front AZ Chassis
The RAK7012 duct adapter is designed to line up with the duct extension where the original chassis was a flat-top discharge A-B Series. Using the RAK7012 will allow the existing duct extension to be used without requiring the relocation of the hole through the wall to the adjacent room. Discharge grille, end plate and extension mounting hardware must be removed from old duct adapter and installed on the RAK7012.
RAK702 (AZ Series*—2100 and 3100 only)
Duct Transition for Replacement of
AZC with Sloped-Front AZ Chassis
The RAK702 duct transition is designed to allow duct installation where the original chassis was a slope-front discharge (AZC or AZR) chassis. Using the RAK702 will allow the existing duct adapter and extension to be used without requiring the relocation of the hole through the wall to the adjacent room.
RAK7022 (AZ Series*—2200, 2500, 2800, 2900, 3200, 3500, 3800, 3900, 4100 and 6100 only) Duct Transition
for Replacement of AZC with Rounded-Front AZ Chassis
The RAK7022 duct transition is designed to allow duct installation where the original chassis was a slope-front discharge (AZC/AZR/AZ21/AZ31) chassis. Using the RAK7022 will allow the existing duct adapter and extension to be used without requiring the relocation of the hole through the wall to the adjacent room.
RAK201 (AZC and AZ Series*)
Access Plate Cover
The RAK201 access plate cover is made of heavy-gauge steel with multiple knockouts for special applications. Will adapt to service conduit .875" or 1.125"; circuit breaker up to 30 amp or 30 amp receptacle. The RAK201 fits old sub-bases RAK120, RAK121 and RAK122 for easy replacement of A-B series with AZC and AZ series.
