HEADSET AND BELT CLIP INSTALLATION
CONNECTING AN OPTIONAL HEADSET TO THE HANDSET
Each handset may be used with an optional headset for hands free operation.
1.Remove the rubber cap covering the headset jack.
2.Connect the headset to the headset jack on the side of the handset.The handset receiver and speakerphone microphone are disabled when the headset is connected.
3.Adjust the headset to rest comfortably on top of your head and over your ear. Move the microphone to approximately two to three inches from your mouth.
4.Press the talk/callback button on the handset to answer a call or make calls with the headset.
5.To return to normal operation, unplug the headset from the jack.
ATTACHING THE BELT CLIP
To attach the belt clip, insert the sides of the belt clip into the slots on each side of the handset. Snap the ends of the belt clip into place.
| Slot for | Slot for |
Headset | belt clip | belt clip |
jack |
|
|
Headset plug
51
