REPLACING THE BATTERY

CAUTION: To reduce the risk of fire or personal injury, use only the battery 5-2548, which is compatible with this unit.

1.Make sure the telephone is OFF (not in TALK mode) before you the replace battery.

2.Remove the battery compartment door.

3.Disconnect the cord attached to the battery pack from the jack inside the battery compartment and remove the battery pack from the handset.

4.Insert the new battery pack and reconnect the

battery plug.

5.Put the battery compartment door back on.

6.Place handset in the base to charge. If you don’t charge

the handset battery properly (for 16 hours) when you first set up the phone and/or when you install a new battery pack, the battery’s long- term performance will be compromised.

BATTERY SAFETY PRECAUTIONS

Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials could be released which can cause injury.

Keep batteries out of the reach of children.

Remove batteries if storing over 30 days.

RBRC

RBRC

Ni-Cd

NOTE: The RBRC seal on the battery used in your ATLINKS USA, Inc. product indicates that we are participating in a program to collect and recycle Nickel Cadmium batteries throughout the United States. Please call 1-800-8-BATTERY for information or contact your local recycling center.

47

Page 47
Image 47
GE 21025/26 manual Replacing the Battery