29
Adding HAndsEts And rE-instAlling tHE
systEm
If you buy additional handsets to expand this system, you must register each
new handset to the base. A maximum of four handsets can be registered to the
base.

Adding onE nEw HAndsEt to tHE systEm

Once your new handset is initialized, the display shows:
Follow instructions in the Handset Registration section to register your
new handset.
IMPORTANT: Your new cordless handset will not operate until it is
registered to the base.

rE-instAlling tHE systEm

If you are not satisfied with the system, re-install it to improve performance.
1. De-register handset (refer to De-registration for instructions).
2. Follow instructions in the Handset Registration section to register
the handset.
3. Repeat steps 1 and 2 for each handset.
bAsic opErAtion

initiAlizAtion And stAndby modE

initiAlizAtion modE

When the power is connected to the handset and base, the unit initializes all the
hardware components, and the handset tries to synchronize with the base.
The display shows the following message for 5 to 10 seconds: