GE 55904080, 25895 Replacing the Battery, Headset Installation, General Product Care, Service

1.Make sure your handset is in menu mode and make sure your phone is OFF (not in talk mode).

2.Press the prog/select button and use the cid /vol (￿ or ￿) buttons until DEREGISTRATION shows in the display.

3.Press the prog/select button until DEREGISTER 1YES 2NO shows in the display.

4.Use the touch-tone pad to enter 1YES, or use the cid/vol (￿ or ￿) button to scroll to 1YES.

5.Press prog/select and MOVE NEAR TO BASE displays until you move the handset closer to the base.

Then the handset displays CONFIRM? 1YES 2NO.

6.Use the touch-tone pad to enter 1YES or use cid /vol (￿ or ￿) button to scroll to 1YES.

NOTE: Press the exit button once to keep the previous setting and return to the main menu screen.

7.Press the prog/select button to confirm the deregistration. Then HANDSET # DE-REGISTEREDdisplays for two seconds followed byHANDSET NEEDS REGISTRATION.

GLOBAL DE-REGISTRATION

If one or more handsets becomes lost, you should de-register all handsets to ensure proper system operation. Follow the steps below to deregister all handsets at the same time.

1.Press and hold the page button on the base until the charge/in use indicator on the base flashes.

2.Press and hold the page button on the base again until the charge/in use indicator on the base flashes rapidly.

3.Press and release the page button on the base once. All handsets are deregistered and HANDSET NEEDS REGISTRATION shows in the display. You will hear a confirmation tone.

IMPORTANT : It is strongly recommended that a handset not be de-registered unless absolutely necessary.

NOTE: After global de-registration, the base initializes again, and the answer date/time should be reset.

DEFAULT

As you become familiar with this system, you may prefer to use the system’s original settings. Follow the steps below to return to the factory default settings.

1.Make sure your handset is in menu mode. Make sure your phone is OFF (not in talk mode).

2.Press the prog/select button on the handset until DEFAULT SETTING shows in display.

3.Press the prog/select button and SET TO DEFAULT 1YES 2NO shows in the display.

4.Use the touch-tone pad on your handset to enter 1YES or 2NO,or use the cid/vol (￿ or ￿) button on your handset to scroll to 1YES or 2NO. 2NO is the default setting.

NOTE: If you choose YES all settings except memory and VIP melody in the programmable menu return to the factory default settings.

NOTE: Press the exit button once to keep the previous setting and return to the main menu.

5.Press the prog/select button to save your selection, and return to the main menu. The default setting you choose shows on the display for two seconds, and you will hear a confirmation tone.

REPLACING THE BATTERY

CAUTION: to reduce the risk of fire or personal injury, use only the battery that list on the accessory order form, which is compatible with this unit.

CAUTION: To ensure the phone/battery performance, use ONLY 25802 charging cradle, 25825, 25826 or 25895 base for battery charging only.

1.Make sure the telephone is OFF before you replace battery.

2. Remove the battery compartment door.

3.Disconnect the cord attached to the battery pack from the jack inside the battery compartment and remove the battery pack from the handset.

4.Insert the new battery pack and reconnect the battery plug.

5. Put the battery compartment door back on.

6.Place handset in the base to charge. If you don’t charge the handset battery properly (for

16 hours) when you first set up the phone and/or when you install a new battery pack, the battery’s long-term performance will be compromised.

NOTE : If the battery is not installed or the battery pack is not properly connected inside the compartment, the handset displays “NO BATTERY” when placed in the base cradle.

BATTERY SAFETY PRECAUTIONS

•Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials could be released which can cause injury.

•Keep batteries out of the reach of children.

•Remove batteries if storing over 30 days.

HEADSET INSTALLATION

CONNECTING AN OPTIONAL HEADSET TO THE HANDSET

For hands free conversation.	Headset plug	Headset jack
1. Insert the headset plug into the
headset jack.
2. Adjust the headset to rest
comfortably on the ear.
3. Move the microphone to		call	CID/VOL
		back
approximately 2 to 3 inches		talk	play 2 stop		spk
		1			def
		rew			skip
					3
from your mouth.		7		abc	9
		4		5	6
		ghi			mno
				jkl
		pqrs		8	wxyz
4. Press the talk/callback button		exit		tuv	pause
			mu	erase	#
		*		0
		format wxyzanswer
to answer or place a call while			te	flash
		select			conf
		prog			int
using the headset.		delete		memory
		redial

GENERAL PRODUCT CARE

To keep your unit working and looking good, follow these guidelines:

•Avoid putting the phone near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps).

•DO NOT expose to direct sunlight or moisture.

•Avoid dropping the handset, as well as other rough treatment to the phone.

•Clean the phone with a soft cloth.

•Never use a strong cleaning agent or abrasive powder because this will damage the finish.

•Retain the original packaging in case you need to ship the phone at a later date.

•Periodically clean the charge contacts on the handset and base with a clean pencil eraser.

CAUSES OF POOR RECEPTION

•Aluminum siding.

•Foil backing on insulation.

•Heating ducts and other metal construction that can shield radio signals.

•You’re too close to appliances such as microwaves, stoves, computers, etc.

•Atmospheric conditions, such as strong storms.

•Base is installed in the basement or lower floor of the house.

•Base is plugged into AC outlet with other electronic devices.

•Baby monitor is using the same frequency.

•Handset battery is low.

•You’re out of range of the base.

SERVICE

If trouble is experienced with this equipment, for repair or warranty information, please contact customer service at 1-800-448-0329. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.

This product may be serviced only by the manufacturer or its authorized service agents. Changes or modifications not expressly approved by ATLINKS USA, Inc. could void the user’s authority to operate this product. For instructions on how to obtain service, refer to the warranty included in this guide or call customer service at 1- 800-448-0329.

Or refer inquiries to:

ATLINKS USA, Inc.

Manager, Consumer Relations

P O Box 1976

Indianapolis, IN 46206

Attach your sales receipt to the booklet for future reference or jot down the date this product was purchased or received as a gift. This information will be valuable if service should be required during the warranty period.

Purchase date _______________________________________________

Name of store________________________________________________

LIMITED WARRANTY

What your warranty covers:

• Defects in materials or workmanship.

For how long after your purchase:

• One year, from date of purchase.

(The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first.)

What we will do:

•Provide you with a new or, at our option, a refurbished unit. The exchange unit is under warranty for the remainder of the original product’s warranty period.

How you get service:

•Properly pack your unit. Include any cables, etc., which were originally provided with the product. We recommend using the original carton and packing materials.

•”Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the warranty period, must be presented to obtain warranty service.” For rental firms, proof of first rental is also required. Also print your name and address and a description of the defect. Send via standard UPS or its equivalent to:

ATLINKS USA, Inc. c/o Thomson

11721 B Alameda Ave. Socorro, Texas 79927

•Pay any charges billed to you by the Exchange Center for service not covered by the warranty.

•Insure your shipment for loss or damage. ATLINKS accepts no liability in case of damage or loss.

•A new or refurbished unit will be shipped to you freight prepaid.

What your warranty does not cover:

•Customer instruction. (Your Owner’s Manual provides information regarding operating instructions and user controls. Any additional information, should be obtained from your dealer.)

•Installation and setup service adjustments.

•Batteries.

•Damage from misuse or neglect.

•Products which have been modified or incorporated into other products.

•Products purchased or serviced outside the USA.

•Acts of nature, such as but not limited to lightning damage.

Product Registration:

•Please complete and mail the Product Registration Card packed with your unit. It will make it easier to contact you should it ever be necessary. The return of the card is not required for warranty coverage.

Limitation of Warranty:

•THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION GIVEN BY ATLINKS USA, INC., ITS AGENTS, OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.

•REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. ATLINKS USA, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF INDIANA. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.

How state law relates to this warranty:

•Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you.

•This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.

If you purchased your product outside the USA:

•This warranty does not apply. Contact your dealer for warranty information.

ACCESSORY ORDER FORM
DESCRIPTION	MODEL NO.	PRICE*
Replacement battery	5-2628	$11.90
Headset	5-2638	$36.35

To place order, have your Visa, MasterCard, or Discover Card ready

and call toll-free 1-800-338-0376.

A shipping and handling fee will be charged upon ordering.

We are required by law to collect appropriate sales tax for each individual state, country, and locality to which the merchandise is being sent.

Items are subject to availability.

*Prices are subject to change without notice.