GE 28041 Memory locations, Handset, Use, Phone line is excessively noisy, Connections, Paging or

ENTER NUMBER	Prompt telling you to enter a telephone number in one of the
	50 memory locations.
HANDSET NAME	Prompt telling you to enter the user name for the registered
	handset.
HANDSET NEEDS	Indicates you must register a non-registered handset prior to
REGISTRATION	use.
INCOMPLETE DATA	Caller information is interrupted during transmission or the
	phone line is excessively noisy.
LINE IN USE	Displays on handset while the line is in use.
LONG DISTANCE	Indicates CID record is from a long distance call.
LOW BATTERY	Indicates the battery needs to be charged.
NEW	Indicates call or calls have not been reviewed.
NEW CALL XX	XX represents the number of new CID records not reviewed.
NO CALLS	Indicates there are no CID records in memory.
NO DATA	No Caller ID information was received.
OUT OF RANGE	May indicate handset is too far away from the base or that
	the power has been interrupted. Move closer and check
	connections.
PAGING or	Someone pressed the PAGE button on the base or INT
PAGING FROM	button on the handset
PLEASE REGISTER	Indicates the handset needs to be registered before use.
REPEAT	Repeat call message. Indicates that a new call from the same
	number was received more than once.
SEARCHING	Indicates handset is searching for the base.
SPEAKER	Indicates the handset is in speakerphone mode.
UNKNOWN CALLER/	The incoming call is from an area not serviced by Caller ID or
NAME/NUMBER	the information was not sent.

52