Low Voltage Connectors & Auxiliary Controls
NOTE: The owner is responsible for checking all switches and ensuring they are set in the desired setting.
Electric Heat Option—Model 3200 Series only
The Electric Heat Option switch #1 increases the Zoneline air temperature by using electric heat only. The heat pump is not used to produce any heat.
Using the Electric Heat Option is much more expensive than heating with the heat pump only.
To set the Electric Heat Option, move switch to the ON (up) position.
1 2 3 4 5 6
UP DOWN
Auxiliary controls
Temperature Limiting
Temperature limiting can reduce energy costs by limiting the lowest temperature that can be set for cooling and the highest temperature that can be set for heating.
Limiting the maximum and minimum settings prevents users from turning the control to the extreme heat or cool positions.
The normal full range of the temp control is approximately 62° F to 85° F. The control range may be narrowed by the use of the temperature limiting screws located behind the control panel.
Limits | Limits |
heat | cool |
temp | temp |
| Each position equals |
| approximately 3° F |
17
