ANSWERING MACHINE OPERATION
This section discusses the buttons and features on the answering machine.
REVIEW button
MEMO button
ERASE
MESSAGES
ANSWER ON
PLAY • STOP
REVIEWSKIP
MEMO |
| ANS. ON |
BATT LOW | MIC | ANNOUNCE |
ERASE button
PLAY • STOP button
SKIP button
ANS. ON button
ANNOUNCE button
MIC
MESSAGE PLAYBACK
The MESSAGES/ANSWER ON indicator light lets you know when somebody has left a message. When you have new messages the light blinks. If you have old messages that have not been erased, the light stays on. To hear messages, press and release the PLAY•STOP button. Incoming messages are limited to 3 minutes each. Press and hold PLAY•STOP for 2 seconds to hear only new messages. (If no new messages, old messages will play).
While a message is playing, you can do the following:
•Press PLAY•STOP to stop message playback.
•Press and release REVIEW to restart the current message; continue to press and release REVIEW to go to previous messages.
•Press and hold REVIEW to review current message.
•Press and release SKIP to go to the next message.
•Press and hold SKIP to fast forward through current message.
ERASING MESSAGES DURING MESSAGE PLAYBACK
Press and release the ERASE button to erase the message that is playing.
NOTE: Messages erased during playback cannot be restored.
13
13 | 1/31/98, 6:52 PM |
