1 Clothes Care Selection

For cottons and most linens.

For loads consisting of cottons and poly-blends.

For wrinkle-free and permanent press items.

For knits and sweaters with fabric care labels that say “Machine Dry.”

For lingerie and special care fabrics.

For tumbling items without heat.

2 Heat Settings

For regular to heavy cottons.

For synthetics, blends and items labeled permanent press.

For delicates, synthetics and items labeled Tumble Dry Low.

For lingerie and special-care fabrics.

3 START/PAUSE

Press START to begin the cycle.

Press twice to select the last cycle you used and start the dryer.

If you have selected a new cycle, press once to start the cycle.

If the dryer is running, press once to interrupt the cycle; press again to continue the cycle.

STOP/CANCEL

This pad should not be used to interrupt or pause a cycle.

Pressing this pad will cancel the current settings and the settings will be lost.

Estimated Time Remaining

As the cycle begins, you will see the approximate total cycle time in the display. Then “racetrack lights” will flash in the display, in a clockwise direction. This means the dryer is continuously monitoring the amount of moisture in the load. The racetrack lights will continue until the dryer senses a low level of moisture in the load. At that point, the dryer will calculate and display the approximate time remaining.

“Racetrack lights”

7

Page 7
Image 7
GE 450 Clothes Care Selection, Heat Settings, Estimated Time Remaining, Press Start to begin the cycle