If the mounting surface is rough or porous, you will need to use the rubber gromments and screws (included). Secure the plate to the desired location with the screws.
Smooth surface | Porus uneven surface |
Test the Silent Alert
Step 1 - After the Silent Alert has been successfully linked with the Control Center, press and hold the Mute button on the Control Center for three seconds. This action sends a test signal.
Step 2 - When the Silent Alert receives the test signal from the Control Center, one LED indicator on the Silent Alert will begin to flash once a second. It will continue to flash for 30 seconds.
Erasing the Silent Alert from the system
Step 1 - Remove the batteries from the Silent Alert.
Step 2 - With the batteries removed, press and hold the Learn button.
