GE 45614 Invert Switch, Restoring Factory Defaults, Interoperability with Z-WaveDevices, Warranty

Invert Switch

If the switch is accidentally installed upside down with “On” at the bottom and “Off” at the top, the default On/Off rocker settings can be reversed by changing parameter 4’s value to “1”.

•Parameter No: 4

•Length: 1 Byte

•Valid Values = 0 or 1 (default 0)

Restoring Factory Defaults

All Configuration Parameters can all be restored to their factory default settings by using your primary controller to delete/reset the device.

Interoperability with Z-Wave™Devices

A Z-Wave™ network can integrate devices of various classes, and these devices can be made by different manufacturers. Although every Z-Wave certified product is designed to work with all other Z-Wave certified products, your controller must include the appropriate device classifications in order to control non-light- ing Z-wave devices. As an example, the GE 45600 basic remote

is designed only for controlling Z-Wave devices using the lighting control classification. The GE 45601 deluxe remote with LCD read- out can control other Z-Wave certified devices like thermostats as well as lighting.

WARRANTY

JASCO Products warrants this product to be free from manufac- turing defects for a period of two years from the original date of consumer purchase. This warranty is limited to the repair or replace- ment of this product only and does not extend to consequential or incidental damage to other products that may be used with this product. This warranty is in lieu of all other warranties, expressed or implied. Some states do not allow limitations on how long an implied warranty lasts or permit the exclusion or limitation of incidental or consequential damage, so the above limitations may not apply to you. This warranty gives you specific rights, and you may also have other rights which vary from state to state. Please contact Customer Service at 800-654-8483 (option 4) between 7:30AM – 5:00PM CST or via our website (www.jascoproducts.com) if the unit should prove defective within the warranty period:

JASCO Products Company

Building B, 10 E Memorial Rd.

Oklahoma City, OK 73114

11