GE 45614, 45609 Air Gap Switch, Key Features, Basic Operation, Remote Control, Manual Control

diagram. It can then be added to groups and/or lighting scenes and managed remotely to control the On/Off status of the connected lighting.

Air Gap Switch

The 45609 has an air gap switch on the lower left side (see diagram for location) to completely disconnect power to the load. Pull the air gap switch OUT to disconnect the power while replacing light bulbs and push it all the way back in for normal operation. The air gap switch must be all the way in for the switch to function and control the lighting.

Key Features

•Remote On/Off control via the Z-Wave controller/network

•Manual On/Off control with the front panel rocker

•LED indicates switch location in a dark room

BASIC OPERATION

Remote Control

GE Z-Wave remotes provide control of an Individual device, Groups of devices and Scenes. Other brands of Z-Wave Certified remotes may not offer as much flexibility in how you can set up your lighting control network. Please refer to your remote control’s instructions for details on its capabilities and instructions for add- ing and controlling devices.

Manual Control

The 45609 switch allows the user to:

Turn ON/OFF the connected lighting.

•To turn the connected lighting ON: Tap the top of the rocker.

•To turn the connected lighting OFF: Tap the bottom of the rocker.

Program your Light Switch (Include or exclude the switch to/from the Z-Wave home control network.)

•Refer to the instructions for your primary controller to access the network setup function and include or exclude devices.

•When prompted by your primary controller, tap the top or bottom of the rocker.

•The primary controller should indicate that the action

was successful. If the controller indicates the action was unsuccessful, please repeat the procedure.

9