GE 49-60634-1 owner manual Door Reversal, Preparing to install the refrigerator

Consumer Support Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions

Preparing to install the refrigerator.

Door Reversal

1. Remove the two screws from under the screw caps located on the top cover.

2. Remove the two screws from the back of

the top cover and remove top cover.

3. Remove the top hinge by removing the

two screws, as shown.

4. Remove the freezer door by lifting off of

the middle hinge.

5. Remove the J-shaped hinge support on the

bottom of the freezer door.

6. Install new J-shaped hinge support on the opposite side of the freezer door bottom. The new J-shaped hinge support and mounting screw are located in a zip lock bag that is shipped with the refrigerator.

7. Remove the fresh food door by lifting off the bottom hinge.

8. Remove both adjustable legs.

9. Remove the bottom hinge and re-install on

the opposite side of the refrigerator.

10. Re-install the adjustable legs. Insure that the smaller leg is on the same side as the bottom hinge.

11. Place the fresh food door on the bottom hinge.

12. Place the bottom peg of the middle hinge in the fresh food door. Re-install middle hinge. Make sure the fresh food door is aligned with the refrigerator cabinet before tightening screws.

13. Place the freezer door on the top peg of the middle hinge. Place the top hinge peg into the freezer door. Re-install top hinge. Make sure the freezer door is aligned with the refrigerator cabinet before tightening screws..

14. Re-install the top cover with four screws..

15. Replace the screw caps.

11