Consumer Support Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions

Preparing to install the refrigerator.

Read these instructions completely and carefully.

Refrigerator Location

 Do not install the refrigerator where the temperature will go below 50°F (10°C) because it will not run often enough to maintain proper temperatures.

Install it on a floor strong enough to support it fully loaded.

Do not install it closer than 5(13 cm) next to a range.

The following applies only to the 2, 3 and 4 Cubic Foot Models:

Do not install it in a recessed area.

Do not build in the refrigerator.

Clearances

Allow the following clearances for ease of installation and proper air circulation.

Sides

1/2” (13 mm)

Top

2” (51 mm)

Back

2(51 mm)*

*From the rear cabinet surface to the wall

Leveling Legs (on some models)

Adjustable legs at the front corners of the refrigerator should be set so the refrigerator is firmly positioned on the floor and the front is raised just enough that the door closes easily when opened about halfway.

To adjust the leveling legs, turn the legs counterclockwise to lower the refrigerator, clockwise to raise it.

10

Page 10
Image 10
GE 49-60634-1 owner manual Preparing to install the refrigerator, Read these instructions completely and carefully

49-60634-1 specifications

The GE 49-60634-1 is a high-performance thermostat designed to enhance the efficiency and comfort of heating, ventilation, and air conditioning (HVAC) systems in residential and commercial settings. This device exemplifies GE's commitment to innovation and energy conservation, featuring advanced technologies that cater to the modern user's needs.

One of the standout features of the GE 49-60634-1 is its intuitive digital display, which allows users to easily navigate through various settings and configurations. The large, backlit screen ensures visibility in low-light conditions, making adjustments simple and straightforward. The user interface is designed to be user-friendly, reducing the learning curve for those who are new to smart thermostats.

The thermostat supports Wi-Fi connectivity, enabling remote access and control through a dedicated mobile application. This feature allows users to adjust temperature settings from anywhere, significantly enhancing convenience. Additionally, the app can provide real-time energy usage reports, helping users monitor and optimize their consumption patterns, further contributing to energy savings.

Another notable technology incorporated into the GE 49-60634-1 is its compatibility with various HVAC systems, including conventional, heat pump, and multi-stage heating and cooling systems. This versatility ensures that homeowners and businesses can integrate the thermostat seamlessly into their existing infrastructure without major modifications.

The GE 49-60634-1 also employs advanced scheduling capabilities, allowing users to set specific heating and cooling schedules tailored to their daily routines. This not only improves comfort but also helps reduce energy costs by ensuring that the system operates only when needed.

Moreover, the thermostat includes adaptive learning capabilities, which analyze user behavior and adjust settings accordingly over time. This feature enhances comfort while optimizing energy usage without requiring constant manual adjustments.

In terms of design, the GE 49-60634-1 boasts a sleek and modern aesthetic that complements a variety of decors. Its compact design makes it suitable for installation in various spaces, ensuring it doesn’t detract from the overall look of the room.

In summary, the GE 49-60634-1 is a technologically advanced thermostat that prioritizes convenience, energy efficiency, and user comfort. With its strong connectivity options, adaptability to different HVAC systems, and intelligent scheduling features, this thermostat is an excellent choice for anyone looking to upgrade their climate control solutions.