Built-in units
RAG13 Stamped Aluminum Exterior Grille “J” Series
Used to replace exterior grille on old “J” wall case to maximize efficiency and capacity of new chassis. The grille is included with new wall cases RAB46, 47, or 48.
RAG14E Architectural Louvered Exterior Grille for “J” Series
Extruded aluminum grille for application with RAB46, 47, or 48.
NOTE: The RAG14E exterior grille is NOT compatible with the RAD4A1 EXTERNAL drain tube. Use of this grille would require the use of the INTERNAL TUBE configuration to drain the unit.
RAF622 Replacement Room Front for Rounded Front “J” Chassis
Used as replacement grille for rounded front “J” chassis units. (Not for use with high mount units.)
RAF622A Replacement Room Front for Rounded Front “J” Chassis
•Replacement Room Front for “J” series chassis with Oval Control Knob opening.
•Not for use on High Mount Models.
RAK690 Architectural Louver Grille Adapter for “J” Chassis Units
Permits most existing architectural louvered grilles to be used with sloped front or rounded front “J” chassis units. Kit consists of two wire mesh screen sections, clips to attach screen to existing wall case, and two aluminum air deflectors to be mounted to new chassis.
17
