Caller ID Solutions, Battery Solutions | GE 25983xx3, 0005467

Unit beeps

•Place the handset in the cradle for 20 seconds. If it still beeps, charge battery for 16 hours.

•Clean charging contacts on cordless handset and charge cradle with a soft cloth or an eraser.

•Replace the battery.

Memory Dialing doesn’t work

•Did you program the memory location keys correctly?

•Did you follow proper dialing sequence?

Unit locks up and no communication between the base and cordless handset

•Unplug the AC power adaptor from the wall outlet and the back of the base. Remove the handset battery. Wait for 30 seconds and plug the power adaptor back into the base and wall outlet. Reconnect the battery and charge for 16 hours.

Caller ID Solutions

No Display

•Is battery fully charged? Try replacing the battery.

•Make sure that the unit is connected to a non-switched electrical outlet. Disconnect the AC power adaptor from the base and reconnect it.

Caller ID Error Message

•The unit displays this message if it detects anything other than valid Caller ID information during the silent period after the first ring. This message indicates the presence of noise on the line.

No Caller ID

•In order to receive Caller ID information, you must subscribe to the standard name/number Caller ID service from your local telephone company.

Battery Solutions

If you experience any of the following problems, even after fully recharging the battery, you may need to replace the battery pack:

•Short talk time

•Poor sound quality

•Limited range

42

Image 42

GE 25983xx3, 0005467, 25983xx2 manual Caller ID Solutions, Battery Solutions

Contents

Model Equipment Approval Information Notification to the Local Telephone Company Licensing Interference InformationHearing Aid Compatibility HAC FCC RF Radiation Exposure Statement Table of Contents Changing the Battery Parts Checklist for 25983xx2 model Introduction Before You BeginTelephone Jack Requirements Installation Important Installation GuidelinesDigital Security System Handset and Charge Cradle Layout Base Layout microphone Installing the Phone Installing the Handset Battery Installing the Phone Connecting the AC Electrical PowerConnecting the Telephone Line Voice Instructions Answering System Set UpConnecting the Corded Handset Attaching the Pedestal Bracket Reviewing Announcement Answering System OperationRecording the Outgoing Announcement Leaving a Message Screening Calls from the Handset When the answering system picks upScreening Calls from the Base Message Playback from Base Unit To erase a message while it is playing Erasing MessagesLeaving a Memo To erase all previously played Messages in a mailbox Telephone Set Up Language Handset Name Display ContrastRings to Answer Security Code Base Ringer Level Handset Ringer ON/OFF Ringer ToneVIP Ring Tone Setting Day/Time Local Area Code Tone/Pulse Dialing Transfer ON/OFFRegistration Link Cordless Handset Default Setting Basic OperationAnswering a Call Manual Channel Selection Call TimerMaking a Call Auto Standby Handset Ringer on/off Shortcut Do Not DisturbFlash Call Transfer Last Number RedialTransferring Call from Base to Cordless Handset Hold Paging the Cordless HandsetPress TALK/CALL Back button Mute VolumeVmwi Indicator on Handset Answering System Base Unit Speakerphone Operation Receiving a Call with SpeakerphoneMaking a Call with Speakerphone Switching Between Speakerphone and Handset MemoryStoring a Name and Number in Memory Storing a Redial Number Inserting a Pause in the Dialing Sequence Reviewing, Changing or Deleting Stored Names/Numbers Dialing a Stored Number Chain Dialing from Memory HandsetBase Caller ID CID Call Waiting Caller IDReceiving CID Records Storing CID Records In CID Memory Reviewing Call Records Storing CID Records in Internal Memory Dialing a Caller ID Number Deleting the Current Caller ID Record Deleting All Caller ID Records Using the Handset Remote AccessCaller ID Errors Answering System Indicator Accessing the Answering System from Another Location Changing the Security Code Changing the Battery Battery Safety Precautions Display Messages Handset Sound Signals Troubleshooting Guide Telephone Solutions Caller ID Solutions Battery Solutions Causes of Poor Reception General Product Care Warranty Assistance Thomson Inc Manager, Consumer Relations Box Indianapolis, Limited Warranty For how long after your purchase If you purchased your product outside the USA Accessory Information Description Model no Index Names/Numbers Ringer Tone Rings to Answer Thomson Inc