4.Use the base or cordless handset touch-tone pad to enter a name (up to 15 characters). More than one letter is stored in each of the number keys. For example, to enter Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times for the second letter L, and press the 1 key to insert a space between the first and last name. Press the 7 key 4 times for the letter S; press the 6 key once for the letter M; press the 4 key 3 times for the letter I; press the 8 key for the letter T; press the 4 key twice for the letter H.
5.Press the memory button or mem/conference button again to save your selection. The display shows ENTER TEL NUMBER.
NOTE: If you make a mistake, press the delete button on the base or delete on the handset to backspace and erase the wrong character(s) or number(s).
6.Use the touch-tone pad to enter the area code followed by the telephone number (up to 24 digits, including pauses) and press the memory button or mem/conference button again to save your selection. You will hear a confirmation tone.
7.To enter another name and number in a different memory location, return to Step 1 and repeat the process.
Storing a Redial Number
1.Make sure the phone is OFF (not in TALK mode).
2.Repeat Step 1 through 6 in Storing a Name and Number in Memory.
3.Press redial to display the redial number and name.
4.Press the memory button on the base or the mem/conference button on the handset to confirm.
NOTE : If the number you want to redial has more than 24 digits, the telephone number cannot be stored in memory.
Inserting a Pause in the Dialing Sequence
Press the #PAUSE/ringer button on the touch-tone pad to insert a delay in the dialing sequence of a stored telephone number when a pause is needed to wait for a dial tone (for example, after you dial 9 for an outside line, or wait for a computer access tone.) Each pause counts as 1 digit in the dialing sequence.
