GE 5GE752RB3A manual LOCKWASHER, 7/16

PB-31101-035A			DRILLING MOTOR
Supersedes PB-31101-035			MODEL 5GE752RB3A
			QUANT
			REQ.
FIG.	REF.		COL.
NO.	NO.	PART NO.	A	DESCRIPTION
2	43	41D735504G6	1	SHUNT ASSEMBLY
2	44	481A539P32	2	CABLE BUSHING, 1 7/32 IN ID, RUBBER
2	45	41A216775P1	AR	SEALANT, 1/8 BY 3 3/4 IN, 10 FT ROLL
2	46	N22P33028	1	BOLT, HEX HD, 5/8 IN-11, 1 3/4 IN LONG
2	47	N22P33024	1	BOLT, HEX HD, 5/8 IN-11, 1 1/2 IN LONG
2	48	N405P47B13	2	LOCKWASHER, 5/8 IN
2	49	N213P33	2	NUT, HEX, JAM, 5/8 IN-11
2	50	N22P27028B13	2	BOLT, HEX HD, 7/16 IN-14, 1 3/4 IN LONG
2	51	N405P44B13	12	LOCKWASHER, 7/16 IN
2	52	4713845P1	1	BOLTING PLATE
2	53	N22P27020B13	10	BOLT, HEX HD, 7/16 IN-14, 1 1/4 IN LONG
2	54	41A230733P4	8	BOLT W/WASHER, SL HX HD, 1/4 IN-20, 1/2 IN LONG
2	55	8809650P1	8	WASHER, CONCAVE, 1/4 IN, SPR STL
2	56	N203P21B13	8	NUT, HEX, 1/4 IN-20
2	57	41A239176P443	AR	SILASTIC PUTTY
2	58	41A239176P133	AR	SILICONE TAPE, 0.015 IN THICK, 1 IN WIDE
2	59	41A239176P18	AR	*TAPE, MICA, 0.005 IN THK, 0.750 IN WIDE
2	60	41A231281P47	7	BRAZING STRIP
2	61	41A239176P399	AR	CORD, 0.073 IN DIA, LINEN
2	62	41A210359P12	2	REDUCING BUSHING, 1 1/2 IN TO 3/4 IN
1	63	41B537963P1	12	CARBON BRUSH
1,2,3	64	41C632667G6	4	BRUSH HOLDER ASSEMBLY
3	65	41B530659G2	12	PRESSURE ARM
3	66	41A231370P2	12	BUSHING, 1.063 IN LONG
3	67	186V831P1	8	SLEEVE
3	68	41A231378P2	4	PIN, 3/8 IN DIA, 6 5/8 IN LONG
3	69	N509P2548	8	PIN, SPRING DOWEL, 1/4 IN DIA, 3 IN LONG
3	70	N509P912	8	PIN, SPRING DOWEL, 3/32 IN DIA, 3/4 IN LONG
3	71	41A230733P7	8	BOLT W/WASHERS, HEX HD SL, 5/16 IN-18, 3/4 IN LONG
3	72	41A231370P6	16	BUSHING, 0.575 IN LONG
3	73	41A330248P1	12	SPRING SEAT
3	74	41A233867G4	12	SPRING SEAT WITH PIN
3	75	41B537844G1	12	SPRING SET ASSEMBLY
3	76	41A233880P1	4	PIN, 7 7/16 IN LONG
3	77	41B535754G28	8	BRUSH HOLDER STUD, MOLDED (0.002 IN OVERSIZE)
3	78	41B535754G29	8	BRUSH HOLDER STUD, MOLDED (0.004 IN OVERSIZE)
3	79	41B535754G30	8	BRUSH HOLDER STUD, MOLDED (0.006 IN OVERSIZE)
3	80	41B535754G31	8	BRUSH HOLDER STUD, MOLDED (0.008 IN OVERSIZE)
1	81	2733755P7	4	BRUSH HOLDER SUPPORT CLAMP
1	82	N22P37052	4	BOLT, HEX HD, 7/8 IN-9, 3 1/4 IN LONG
1	83	41B537660P25	4	WASHER, FLAT, 0.968 IN ID, 1.375 IN OD
1	84	41D735773G1	1	ARMATURE ASSEMBLY

* ADDED OR CHANGED SINCE LAST ISSUE.

SEPTEMBER 10, 1997 8