POWER DATA ERROR
Bad checksum of flash data
No battery found when charging
Low Thermal Head temperature
High Thermal Head temperature
Data Receive Error
Indicator Light Warnings
The POWER indicator light does not light
The printer is receiving no power. If you are using the AC adapter, make sure it is connected properly. See page 2, “Connecting to an AC Outlet (Optional)”. Make sure the AC power outlet is “live”. If you are using a DC adapter, make sure power is connected and that the fuse is good.
No Battery Found When Charging
If this indication occurs immediately when attempting to charge the battery, the printer did not detect a battery when you tried to initiate a battery charging cycle. Make sure the battery has been installed and connected properly and that there are no broken wires at the battery or connector. See page 36, “Installing the Battery (Optional)”.
Page 52
