Driver Installation

NOTE: Please do NOT connect your PocketJet printer to your computer via the USB cable UNTIL you have performed the driver installation. If you accidentally do so, cancel the “New Hardware Wizard”, disconnect the printer, and begin the driver installation described below.

Using a Bluetooth Interface - Be sure Bluetooth is installed on the host computer and is active according to the host computer instructions before installing the PocketJet driver and the PocketJet Configuration Utility if you are going to use the Bluetooth interface.

CD Install

1.Insert the CD in your PC’s CD drive.

2.Select the model.

3.Select the install item you wish to install.

4.Follow all on-screen instructions to install the software. Your Windows operating system will be selected automatically.

5.Click “Finish” to close the CD or click “browse” to learn about additional solutions available for your PocketJet printer.

Note: If the automatic CD installation does not proceed as explained above, use the manual install procedure below.

Page 7

Page 18
Image 18
Brother PJ-522 manual Driver Installation, CD Install