Brother PJ-522 manual PocketJet Configuration Utility, Installing the PocketJet 3 Utility

PocketJet Configuration Utility

The CD supplied with the printers (PJ-522, PJ-523) contains a PocketJet Configuration Utility. This can be used to access advanced printer settings for custom installations if needed.

The Configuration Utility can be used in these three situations:

§If you are printing from a Windows 2000, XP, or Vista-based system and are using the Windows driver supplied by Brother, only the following five options should be configured from the configuration utility:

§Auto- On

§Auto- Off

§Pre-feed

For Bluetooth Printers:

§PIN Code Setting

§Local Name Setting

Note that all other settings in the Configuration Utility window will be overwritten by the installed driver settings.

§If you are printing from a Windows system but are not using the Windows driver supplied by Brother, all options can be configured.

§If you are printing from a non-Windows-based system, all options can be configured.

Installing the PocketJet 3 Utility:

When using the CD Installation program to install drivers for Windows Vista, XP, 2000 Professional, you should select “Install Configuration Utility” Button. You must follow the onscreen instructions to complete the installation (See “Driver Installation”, page 7).

To install the PocketJet 3 Utility independently on a Windows host, browse the CD into the <CD-Drive>:\<PJ3, PJ3BT, PJ3PLUS or PJ3PLUSBT> \Config folder, and then double-click the PJ3CONFIGSETUP.EXE (or PJ3PLUSCONFIGSETUP.EXE), and follow the onscreen instructions.

Page 17