Via Infrared (IrDA)
If a USB cable is not connected to the PocketJet printer when it is turned on, the infrared connection is automatically enabled. Make sure your computer is set properly to send data via its infrared port, make sure the two infrared ports are aligned toward each other, and proceed to print.
Via Bluetooth (Bluetooth Models Only)
1.Follow the recommendations of the manufacturer of your Bluetooth equipped host computer or adapter to install any necessary hardware and software.
2.If “pairing” is necessary using a PIN code, use the PocketJet Utility that accompanies your PocketJet3 Bluetooth printer to set the printer’s PIN password.
See information on PIN setting in “Bluetooth Menu”, page 19.
NOTE: The default PIN code is “default”.
3.Connect to the printer according to the instructions supplied with your Bluetooth equipped host or adapter.
Page 14
