Barcode: 690 5039 10 000 7 00243
cleaning
Automatic clean function
The coffee maker is equipped with an automatic clean function. After 60 brewing cycles, the clean indicator/button (22) lights up. This indicates coffee maker should be cleaned by using the automatic clean function and the charcoal filter (17) should be replaced.
NOTE: The coffee maker can continue to be used, when clean indicator/button (22) is on.
•To begin the cleaning cycle, remove the charcoal filter (17) from the water tank (10). Fill the tank with a vinegar and water mixture (1/2 vinegar and 1/2 water) or a descaling product. Press clean (22) button for three seconds. The clean indicator/ button (22) flashes and the cleaning process begins.
Cleaning process:
•24 cycles of 7 seconds brewing and 21 seconds off
•30 minutes rest
•Brewing the remaining descaling solution
•After cleaning process is complete the clean indicator/button (22) goes off. Fill water tank (10) with clean water and run one brewing cycle to rinse the coffee maker.
•Change the charcoal filter (17) (ill. k ). Reinsert the charcoal filter to the coffee maker (ill. l ).
NOTE: You can use the cleaning function before reaching 60 cycles (especially if the water hardness is above normal). Press and hold clean indicator/button (22) for 3 seconds.
NOTE: The Cleaning Process takes 60 minutes to complete. You cannot cancel the cleaning process before it is complete. Unplugging the machine only delays the cleaning process.
|
| 11 |
|
|
Client: | PIL (Wal*Mart) | Date: | 06.03.2008 | |
Project: | 169164 | Version: | 08 |
|
Language: | EN | Page: | 11 | (of 14 pages) |
