Not for
Reproduction
17
Advanced Settings Screen
ok
ok
ok
ok
kW
Hz
kW
FLASHING
50/60 Hz
FLASHING
PHASE
SINGLE
or
THREE
FLASHING
VOLTS VOLTS
FLASHING
SOFTWARE
VERSION DISPLAYED
or
or
or or
or or
or or
Advanced setting parameters are preset at the factory for a typical installation. To view Advanced Settings items and/or to
change items, follow the instructions listed below.
NOTICE Advanced settings are critical to the operation of the unit. Careful consideration should be taken when working in
the Advanced Settings menu. Exercise caution when selecting and verifying parameters for the generating set and region
where the generating set is being operated. Confirm all settings before operating the generating set for the first time.
For advanced menu items, press and hold the left arrow, right arrow, and escape key for 3 seconds. Follow the
prompts as outlined below.
NOTICE In the Advanced Setting menu, a three button access code (left arrow, right arrow, and escape key must
be pressed once to enter the menu and again to change any setting. After each confirmation of a setting, the selection will
display solid for 2 seconds before moving to the next program item.
ok
ok
ok
ok
ok
ok