How to Assemble and Use
CAUTION: Be sure cord is not connected to electric outlet when removing or inserting blades and when knife is not in use. The blades are extremely sharp. Always handle by the side opposite the cutting edge, as illustrated, or by the plastic guards.
1.If blades are separated, pick up by the plastic guard. Slide the rivet on one blade into the key- hole slot in the other blade until
they are locked together. 2. Holding blades together at the
base of the blade with cutting edge down, slide onto motor
housing until both blades click into place. Make sure blades match. The plastic guard at end of blade should be either all WHITE or all GRAY.
3.Plug cord into an electric outlet.
4.Hold knife by handle. Pull On/Off button like a trigger to operate. You must hold the button “On” for the knife to operate.
5.To stop, release button.
How to Disassemble and Clean
WARNING: To reduce risk of personal injury, always disconnect cord from electric outlet before inserting, removing or clean- ing blades. Blades are sharp; handle carefully.
1.Unplug cord from electric outlet.
2.Firmly pull back blade release button. Grasp plastic guard and carefully pull until blades release.
3.Carefully separate blades by sliding apart to disengage rivet from keyhole.
4.Wash blades in hot, soapy water or top rack of dishwasher. Rinse and dry thoroughly.
5.After washing and drying, immediately place blades into the protective sleeve for storage.
6.To clean motor housing and cord, wipe with a damp cloth and then dry thoroughly.
Customer Service
If you have a claim under this warranty, please call our Customer Assistance Number. For faster service please have model, series, and type numbers ready for operator to assist you. These num- bers can be found on the motor housing of your electric knife.
MODEL : ___________ TYPE : ___________ SERIES : ___________
Customer Assistance Number:
Keep this number for future reference!
6 | 7 |
