840136200 Ev02 6/29/05 9:55 AM Page 4
Using Your Iron
To Dry Iron
1.Plug in iron.
2.Turn Adjustable Steam to the Dry
Iron 
position.
3.Set Fabric Setting Indicator to desired temperature. Allow the iron to heat until the indicator box around the selected fabric stops blinking.
4.To turn iron off, set Fabric Setting Indicator to OFF/0 and unplug iron. The iron may be turned off by press- ing the Temperature Selector button for 3 seconds.
To Steam Iron
1.Unplug iron. Turn Adjustable Steam
to the Dry Iron 
position. Set iron upright on heel rest. Using a cup, slowly pour 8 ounces (250 ml) of tap water into the water tank opening (or until MAX fill line is reached).
2.Plug in iron.
3.Press Temperature Selector. With iron in an upright position, set Fabric Setting Indicator to desired setting in steam range. Allow the iron to heat until the indicator box around the selected fabric stops blinking. Do not preheat the iron with the soleplate facing down.
4.Set Adjustable Steam to desired steam output. See the “Fabric Setting Chart.”
5.To turn iron off, turn Adjustable
Steam to Dry Iron 
. Press Temperature Selector. Set Fabric Setting Indicator to OFF/0 and unplug iron. The iron may be turned off by pressing the Temperature Selector button for 3 seconds.
6.Empty water from the iron following directions in “Caring for Your Iron and Soleplate.”
Water
Please use ordinary tap water. If you have extremely hard water, alternate between tap water and distilled water for use in the iron.
Features (on selected models)
Blast of Steam and Spray Buttons
Push Blast Button for an extra blast
|
| of steam. Push |
|
| Spray Button to |
|
| release a fine |
|
| spray of water for |
|
| difficult wrinkles |
Blast | Spray | in cotton or linen. |
Quick Off
Press and hold the Temperature Selector for 3 seconds to turn the iron off quickly.
Temperature
Selector
4
