Installation Instructions
Read completely then follow step-by-step
Install the Filler Panels
1Insert the right and left hand filler panels into the top and bottom rails.
2Secure them with eight 3/8″ screws, four on each side.
Install the
Support Bracket
13/16″
Level with sill
1Screw the leveling bolt into the support bracket.
2Mark the centerline of the
window and place the support bracket on it 13/16″ from the window stool.
3Attach the support bracket
onto the window sill with two 1″ screws.
4Peel the backing off the bottom window gasket and place onto the backside of the window stool.
5Using the level, adjust the level-
ing bolt so the curved top of the support bracket is 1⁄4″ below the top of the window stool.
1/4″
Support bracket
NOTE:
This downward tilt towards the outside prevents water from entering the room.
Stool
10