Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

SAFETY PRECAUTIONS

When using this dehumidifier, always follow basic safety precautions, including the following:

Tips Care and Cleaning Operating Instructions

■Use this appliance only for its intended purpose as described in this Owner’s Manual.

■This dehumidifier must be properly installed and grounded as described

in this manual before it is used.

■Never operate this dehumidifier in an area that is likely to accumulate standing water. If this condition develops, for your safety disconnect the power supply before stepping into the water.

■Never unplug your dehumidifier by pulling on the power cord. Always grip plug firmly and pull straight out from the receptacle.

■Replace immediately all electric service cords that have become frayed or otherwise damaged. A damaged power supply cord must be replaced with a new power supply cord obtained from the manufacturer and not repaired. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

■If the receptacle does not match the plug, the receptacle must be changed out by a qualified electrician

■Turn the dehumidifier OFF and unplug it before cleaning.

■GE does not support any servicing of

the dehumidifier. We strongly recommend that you do not attempt to service the dehumidifier yourself.

■For your safety, do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

■All dehumidifiers contain refrigerants, which under federal law must be removed prior to product disposal. If you are getting rid of an old product with refrigerants, check with the company handling disposal about what to do.

■Do not use outdoors.

■This dehumidifier is intended for indoor residential applications only. This dehumidifier should not be used for commercial or industrial applications.

■These R410A Dehumidifier Systems require contractors and technicians to use tools, equipment and safety standards approved for use with this refrigerant. DO NOT use equipment certified for R22 refrigerant only.

HOW TO CONNECT ELECTRICITY

Consumer Support Troubleshooting

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

For personal safety, this appliance must be properly grounded.

DO NOT use an adapter plug with this appliance.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric

shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The dehumidifier should always be plugged into its own individual electrical outlet, which has a voltage rating matching the rating plate.

This provides the best performance and also prevents overloading house wiring circuits, which could cause a fire hazard from overheated wires.

2

Page 1 Page 3
Page 2
Image 2
GE ADEH50 owner manual Tips Care and Cleaning Operating Instructions, Do not use an adapter plug with this appliance
Page 1 Page 3

ADEH50 specifications

The GE ADEH50 is a cutting-edge heat pump that has gained significant attention in the market for its advanced features and energy-efficient technology. As homeowners and businesses alike seek sustainable solutions for temperature regulation, the ADEH50 emerges as a strong contender, combining efficiency, reliability, and innovative design.

At the heart of the GE ADEH50’s performance is its highly efficient variable-speed compressor. This technology enables the heat pump to adjust its output according to the immediate heating or cooling demands of a space. By operating at different speeds, the ADEH50 can maintain a consistent indoor temperature with minimal energy consumption, significantly reducing electricity costs compared to traditional single-stage systems.

Another noteworthy characteristic of the GE ADEH50 is its use of environmentally friendly refrigerants. The heat pump employs R-410A refrigerant, which has been recognized for its low global warming potential. This commitment to eco-friendly technology not only aligns with environmental regulations but also meets the growing consumer demand for sustainable products.

The ADEH50 also features advanced smart technology integration. It can be connected to Wi-Fi, allowing users to control their heating and cooling systems remotely via smartphone apps. This feature not only enhances convenience but also enables homeowners to optimize energy usage by adjusting settings according to occupancy patterns, ultimately leading to increased savings and a reduced carbon footprint.

In terms of design, the GE ADEH50 is built to withstand various weather conditions. Its robust construction includes a durable cabinet and corrosion-resistant components, ensuring longevity and reduced maintenance needs. The heat pump is also equipped with a quiet operation technology that minimizes noise, making it an ideal choice for residential areas where peace and comfort are a priority.

The GE ADEH50’s capacity options cater to diverse needs, making it suitable for different sizes of spaces. Its energy efficiency is reflected in its high Seasonal Energy Efficiency Ratio (SEER) and Heating Seasonal Performance Factor (HSPF) ratings, which signify its effectiveness in both cooling and heating modes.

In summary, the GE ADEH50 stands out in the heat pump market, offering a blend of advanced technology, environmental sustainability, and reliable performance. With its variable-speed compressor, smart technology integration, and durable design, it is an excellent investment for anyone looking to enhance comfort while promoting energy efficiency and sustainability in their living or working environment.
Top Page Image Contents