Instructions

Using the dehumidifier.

Always make sure the water bucket is locked into place on the dehumidifier.

Operating Instructions Safety

Removing Collected Water

There are 2 ways to remove collected water:

Use the bucket. When the bucket is removed, the unit will shut off. Empty and replace the bucket.

NOTE: Support bucket with both hands when emptying.

IMPORTANT: Do not use the hose if using the bucket to collect water. When the hose is connected, water will flow through it onto the floor instead of into the bucket.

NOTES:

Do not remove the bucket while the dehumidifier is operating or if it has just stopped operating. This might cause some water to drip from the drain pan.

Use a hose. Water can be automatically emptied into a floor drain by attaching a garden water hose (not included).

1.Remove the bucket from the front of the unit.

2.Open the drain cover on the side of the unit.

3.Thread a garden hose (not supplied) onto the nozzle, cut to length, and lead it to the floor drain.

Side of unit

Consumer Support Troubleshooting Tips Care and Cleaning

The bucket must be in place and securely

4. Replace the bucket in the unit.

seated for the dehumidifier to operate.

NOTE: The bucket must be in place and securely

 

 

seated for the dehumidifier to operate.

Water Level

The dehumidifier will turn off automatically

The bucket must be replaced in the proper position

when the bucket is full, or when the bucket is

for the dehumidifier to work. The light will be on

removed or not replaced in the proper position.

and the dehumidifier will not run if the bucket is not

 

in the proper position.

Bucket Operation

DO NOT remove the foam piece in the bucket assembly. If removed the Dehumidifier will not work properly.

Foam

6

Page 6
Image 6
GE ADER30, ADER50, ADER65, ADER40 owner manual Instructions, Removing Collected Water, Water Level, Bucket Operation